PS2EXE: Tool for “converting” PowerShell scripts to “standalone” EXE files

In the last days I created the tool “PS2EXE”. It is able to “convert” PowerShell scripts to “standalone” EXE files.

Project site here: – It’s ALPHA in the current version

Version Update from to at 2011-08-22.

But: It does not convert the PowerShell script to an other language! It encapsulates the script with a lightweight PowerShell host written in C# and compiles the dynamically generated C# source code in memory to an EXE file. The resulting EXE is an .NET assembly that contains the source script encoded in Base64. The EXE includes all stuff that is needed to execute an PowerShell through the .NET object model. It is based on classes in the namespace System.Management.Automation that reperents the PowerShell engine. – Therefore the EXE file is not a real “standalone” EXE file. It needs PowerShell to be installed!!! And – of course – it needs .NET Framework v2.0. Furthermore “script execution” have to be allowed (see cmdlet: set-execultionpolicy). – The resulting EXE is “MSIL” and is able to execute as x64 or x86.

The tool “PS2EXE” itself is a PowerShell script! – It does the in-memory compilation and generates the EXE file. It uses the CSharpCodeProvider class of namespace Microsoft.CSharp.

The script is really simple. I contains a multiline string that represents the PowerShell host I’ve written. This is much more interesting than the PS2EXE.ps1 script itself. – Have a look into it!


Call  the script with this parameters:

-inputFile PowerShell script file
-outputFile file name (with path) for the destination EXE file
-debug (switch) generate debug info in the destination EXE file. The dynamically generated .CS file will stored beside the output EXE file. Furthermore a .PDB file will be generated for the EXE file
-verbose (switch) shows also verbose informations – if any.



This creates “test.exe” out of the PowerShell source file “test.ps1”

Limitations: It’s not easy to create a fully functional PowerShell host such as “Console host” (powershell.exe) or “ISE” (powershell_ise.exe). So there may be functionality that does not work properly.


The generated EXE can also be calls using command line options. There are 4 options that are used by the PowerShell host:

-debug Forces the EXE to be debugged. It calls “System.Diagnostics.Debugger.Break()”.
-extract:”Filename” Extracts the PowerShell script inside the EXE and saves it as “Filename”. The script will not be executed.
-wait At the end of the script execution it writes “Press a key…” and waits for a key to be pressed.
-end All following options will be passed to the script inside the EXE. All preceding options are used by the EXE and will not be passed to the script.


I create a script file containing this line of code:

$args | Write-Host


I save it as “c:\test2.ps1” and convert it as EXE by using PS2EXE:


Sample 1.: “-wait” forces the “Hit any key…” message. All options following “-end” will be passed to the script.

Sample 2., 3. : The script will not get options preceding to “-end”.

Sample 4: “-wait” follows to “-end” and so it’s passed to the script. No message “Hit any key…”.

So. That’s it for the moment. Please feel free to modify the script and let me know.

Possible tasks:

  • Sign the script inside the EXE with code signature
  • Sign the EXE with code signature
  • Compress the script inside the EXE
  • Improve the PSHost implementation inside the EXE.

Have fun!


27 thoughts on “PS2EXE: Tool for “converting” PowerShell scripts to “standalone” EXE files

  1. Well it works. However, Base64 is a plain text. Have anyone tried to decipher that? I’ve compiled a few scripts, newly created exe work fine. I’m just a bit worried that anyone with a decent knowledge of cryptology might break it. I’ll try to that myself and post results.

    Thanks for sharing!

    1. Vladimir –

      it’s definitly possible to decrypt it. – First you would use “ILSyp” to decompile the EXE and than you can copy the Base64 text into an online converter tool… Sorry 😉


  2. How do I get the get-credential to work properly? I found out how to do a reg hack to make it stay via command like, but when converted to exe it doesn’t ask for both username and password.

  3. hello,

    I think it is a great tool

    however I have some troubles to convert in .exe scripts which contains Exchange and AD cmd-lets.

    Can you please help?

    Also I do not have PowerShell 2.0 on all servers, is it possible the .exe files to work there?
    Installing the PowerShell 2.0 is not an option, it require approvals, which I will never get.

    1. Hi!

      It’s not possible to run a PowerShell script without PowerShell installed on the machine. PS2EXE does not really convert a PowerShell script to an EXE file. It only creates a PowerShell “runspace” = execution environment. Therefore PowerShell must be installed locally. Sorry. 😉

      May be there is a way to include the PowerShell runtime files in the generated EXE but I did not try this jet.

      You also need to install all required extensions, e.g. Exchange, an each machine where you want to execute the generated EXE file.

      Kind regards

      1. Hello,

        Sorry for the misunderstanding! I mean does the PowerShell 2 required, not just PowerShell.

        PowerShell 1 is a prerequisite for installing Exchange Server 2007, and there is PowerShell 1.0 installed on all servers. All command lets which are included in my script (which have to be converted in .EXE), are available and running successfully on PowerShell1.0.

        As far as I understood PowerShell 2.0 is required the ps2exe.ps1 to work. My actual question was, does the PowerShell 2.0 required on all machines the EXE file to be executed, because on the most of clients it is version 1.0? The original script is working when it is not converted.

        Also could you please advise how the additional snapins can be included in the .EXE. The converted script does not work even on the original server, just because the .EXE does not recognize the Exchange cmd-lets even if I put the following line into the beginning of the script:

        Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin

        Thank you in advance.

  4. I keep getting an error when I try to run this. not sure if it is because I am running 64 bit version of .net 2.0 or not. Maybe you can offer some insight?

    PS D:\scripts\ps2exe> .\ps2exe.ps1 -inputfile d:\scripts\ps2exe\test.ps1 d:\scripts\ps2exe\test.exe -verbose
    PS2EXE; v0.1.0.0 by Ingo Karstein (

    Reading input file d:\scripts\ps2exe\test.ps1

    Compiling file…

    Could not create the PowerShell .exe file because of compilation errors. Use -verbose parameter to see details.
    VERBOSE: c:\Users\rmcgee\AppData\Local\Temp\2rsi4trn.0.cs(196,55) : error CS0012: The type
    ‘System.Dynamic.IDynamicMetaObjectProvider’ is defined in an assembly that is not referenced. You must add a reference
    to assembly ‘System.Core, Version=, Culture=neutral, PublicKeyToken=b77a5c561934e089’.

        1. Still a no go…

          PS C:\PS2EXE-v0.2.0.0> .\ps2exe.ps1 -inputfile “C:\WindowsProdKey.ps1” “C:\WindowsProdKey.exe” -runtime20 -verbose
          PS2EXE; v0.2.0.0 by Ingo Karstein (

          Reading input file C:\WindowsProdKey.ps1

          Compiling file…

          Could not create the PowerShell .exe file because of compilation errors. Use -verbose parameter to see details.
          VERBOSE: c:\Users\sage\AppData\Local\Temp\3wfmg54c.0.cs(196,55) : error CS0012: The type
          ‘System.Dynamic.IDynamicMetaObjectProvider’ is defined in an assembly that is not referenced. You must add a reference
          to assembly ‘System.Core, Version=, Culture=neutral, PublicKeyToken=b77a5c561934e089’.
          PS C:\PS2EXE-v0.2.0.0>

          1. Hi! – This is strange. This Assembly (dynamics) is part of .NET Framework 4. But the C# compiler utilized in the PS2EXE script is set to use 2.0… So this assembly should be unknown to this compiler.

            Please check directory “C:\Windows\System32\WindowsPowerShell\v1.0”. Do you have a file “powershell.exe.config”? If so please post it’s content.

            As another approach please open a PowerShell console and type in this command:
            Please post the output.


              1. Just wondering whether you have a solution to this? I am getting the same errors.

  5. thank you man for this great tool but I found a little problem after converting my script to exe it exits automatically is there something that I can do to make it doesn’t exit

  6. if my PS script contain parameter,when I convert my PS script to EXE,it seems that it does not provide

      1. If my PS script contain parameter,when I convert my PS script to EXE,it seems that it does not provide,for example:
        (my ps script are shown in the following)

        function ping-test


        save it as ping-test.ps1, and convert it to ping-test.exe, but when I add the parameter “loop”, it does not work.

        How to make it work?

        1. It’s not a bug, but it works diffrent 😉

          See this version of your script

          write-host "here are all command line arguments"
          write-host $args

          #initialize parameter variables
          $loop = $false

          #parse command line arguments in array $args
          if($args -icontains "-loop") {
          $loop = $true

          function ping-test


          #Get-Variable | ft name, value #check all variables
          ping-test -loop:$loop

          You have to use “$args” not “param(….)”. You have to parse the $args array yourself!

          I’ve made a small improvement to the PS2EXE script. So it’s version now!

  7. Hello, it’s a very useful app, however it’s not possible to use .NET classes… because I got an error message while running my exe:

    “Cannot find type [System.Windows.Forms.Form]: make sure the assembly containing
    this type is loaded.”

    What could be the problem?

    1. Try to add the following line at top of your PowerShell script:


      – Does it work?

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s